| Plantraco HFX900 Deluxe Starter Set 1 |
|
|
 |
|
|
|
|
|
| Click images for larger photos | |
|
|
|
|
|
| |
| Set includes the following components: |
| | Transmitter: | HFX900 Model 2 900Mhz R/C transmitter* (Built-In LiPo charger) |
| | Receiver: | Micro9 0.9 g receiver |
| | Servos: | 2 - MiniAct 1.1 gram actuators |
| | Power unit: | 6mm coreless motor 1.34 g |
| | Gearbox: | GB04 - 6mm gearbox (5.8:1) |
| | Propeller: | 100 x 80mm prop for 1mm shaft, 0.85 gram - Black |
| | Batteries: | 2 - 90mAh LiPoly Bahoma batteries |
| | Flight Simulator: | Flight sim interface cable, and FMS RC flight simulator freeware |
| * Transmitter requires 4 AA cells |
|
|
|
View the HFX900 manual with Model 1 and 2 information. |
| |
| HFX900 Model 2 Transmitter - 10 MM Bahoma |
|
Plantraco HFX900 Deluxe Starter Set 2 |
 |
|
 |
| Click image for larger photo |
|
|
|
|
|
|
|
|
|
|
| |
| Transmitter Description: |
| | Charger: | Built-In 10mm Bahoma LiPo charger. Charges 90mAh liPo Bahoma batteries |
| | Channels: | Full proportional 4 channel output |
| | Frequencies: | 6 user selectable |
| | Mixing Modes: | Negative Expo, V-Tail, and Normal |
| | Input Jacks: | RJ-12 jack for buddy box. Connect a Hitec or Futaba 72 Mhz TX to make it a 900 Mhz TX. FMS flight sim input jack |
| | Receiver: | Requires Plantraco 900 Mhz receiver |
| | Batteries: | Requires 4 AA cells |
|
| |
| Use this set for the Micro Racers: |
| Set includes the following components: |
| | Transmitter: | HFX900 900Mhz R/C transmitter* (Full proportional TX with built-In LiPo charger) |
| | Receiver: | Micro9 0.9 g receiver |
| | Servos: | 2 - MicroAct .41 gram actuators |
| | Power unit: | 7mm direct drive motor |
| | Propeller: | 2 - different size props - Black |
| | Batteries: | 2 - 90mAh LiPoly Bahoma batteries |
| | Flight Simulator: | Flight sim interface cable, and FMS RC flight simulator freeware |
| * Transmitter requires 4 AA cells |
|
| |
| GWS T4AII 4 Channel Transmitter |
|
HFX900 Model 2 Transmitter - 5 MM Bahoma |
 |
|
 |
| Click image for more photos |
|
Click image for larger photo |
|
|
|
|
|
|
|
|
| |
| Transmitter Description: |
| | • Channels: | 4 |
| | • Frequency Band: | 72 MHz |
| | • Modulation: | PPM (FM) System. Compatible with Futaba, JR, and Hitec |
| | • Low Battery Indicator: | Below 8.8V LED turns to red |
| | • Power Source: | 9.6V 550 mAh (AAA) Ni-MH Battery Pack |
| | • Can use with MicroInvent products |
| | • Includes TX Crystal, servo reversing switches, |
| | trainer cord jack, and wall charger |
| | |
| | |
| | |
|
| |
| Transmitter Description: |
| | Charger: | Built-In 5mm Bahoma LiPo charger. Charges 30mAh liPo Bahoma batteries |
| | Channels: | Full proportional 4 channel output |
| | Frequencies: | 6 user selectable |
| | Mixing Modes: | Negative Expo, V-Tail, and Normal |
| | Input Jacks: | RJ-12 jack for buddy box. Connect a Hitec or Futaba 72 Mhz TX to make it a 900 Mhz TX. FMS flight sim input jack |
| | Receiver: | Requires Plantraco 900 Mhz receiver |
| | Batteries: | Requires 4 AA cells |
|
| |
| Plantraco Monolith Transmitter Module |
|
|
 |
|
|
| Click image for larger photo |
|
|
|
|
|
|
|
|
|
| |
| Module Description: |
| | • Converts your 72 MHz TX to 900 MHz |
| | • Use with Plantraco Micro-9 receivers |
| | • Requires Hitec, or Futaba transmitters |
| | with Din6 jack. |
| | • Easy to install, and uninstall |
| | • Won't interfere with other 72 MHz transmitters |
| | • Powered from your 72 Mhz transmitter |
| | • 900Mhz ISM band USA |
| | Monolith Manual |
|
| |
|
| page updated: 02/01/10 |
